贵州Three common problems in the use of automatic winding machine

Many customers in the purchase of automatic winding machine, in the process of using automatic ring winding machine will encounter such problems, affecting the normal production of customers. A careful analysis of these problems can be roughly divided into the following aspects.

1. Environmental and power problems

Winding machine is a kind of precision electrical equipment which has certain requirements for the use environment. Moisture, dust and vibration will affect the normal use of the winding machine. For the winding machine used in this environment for a long time, the wear and normal state of the components are abnormal. Proper power supply is also important. Abnormal temperature rise, overheating and electrical control system abnormality may occur in the winding machine in the environment with large voltage fluctuation. The controller of winding machine is a very accurate control system. High requirements for power supply, qualified customers should have a dedicated power circuit, and circuit terminals should be equipped with a voltage regulator.

2. Problems caused by improper setting of winding parameters

The normal operation of the winding machine cannot be separated from the correct setting of parameters of the winding machine. Parameter setting error will also make the winding machine can not work properly. The user should combine the production process of the product, pay attention to the correct setting of the winding machine. Common parameters of winding machine include starting winding point, winding width, total number of turns, starting winding idle, stop winding idle, etc. These functions are detailed in the winding machine instruction and application examples for user reference.

3. Common problems caused by winding process and materials used

Whether the winding process is correct will determine whether the winding machine can wind normally. Good winding technology can improve processing efficiency and reduce line loss. On the contrary, the wrong winding process will cause the winding machine to wind. The coil does not meet the design requirements. The operation of the winding machine requires wire and frame. These materials play a very important role in the normal operation of the winding machine. Poor quality enamelled wire can lead to irregular wiring and skeleton deformation. In the winding process of the winding machine, make the spindle shake, the edge will overlap