福建Ring winding machine fault maintenance method

Maintenance method: winding machine fault classification is limited to: electrical, mechanical, transmission, pneumatic (if any) these types, which electrical parts are generally divided into strong and weak, winding machine manufacturers in the design, use and maintenance of its numerical control system, take into account vulnerable to damage, prone to failure components alarm, alarm circuit work, on the one hand in the display or operation panel, give protection instructions. Power off or stop the system to ensure safety and prevent further failure.

Reset method of the whole machine: under normal circumstances, the errors of the whole machine caused by the instantaneous fault of the winding machine can be cleared by hardware reset or system power switch in turn. If the system's working memory area is confused due to voltage instability, undervoltage of the plug-in board or rectifier switch power supply, the system must be initialized and cleared. Before deleting the data, make a backup record of the current data. If the system is reset and the fault cannot be rectified after the in-place initialization, you can reset the system and perform hardware replacement diagnosis.

Winder manufacturers should prepare reasonable procedures, and successful operation, to determine whether the whole system function is good. Some setting errors of winding parameters may lead to system failure or failure of some functions. Sometimes, due to user program error resulting in fault shutdown, can be used to debug program programming to check and correct the user program error, to ensure its normal operation, normal operation.

For example, adjusting winding tension, shielding voltage, line setting starting position and other adjustable parts are easy to simplify, but the maintenance effect is remarkable. Some harmless faults can be corrected by adjusting the adjustable parts. After adjusting the power supply voltage of the screen, the system display screen is dark and normal.

During the maintenance of the winding machine, replace suspicious parts with intact spare parts. After the maintenance personnel basically determine the cause of the fault, the maintenance personnel can use this method to quickly diagnose the fault scope, make the winding machine quickly put into normal operation, and then return the damaged parts for maintenance. This is a common troubleshooting method.